|
|
|
Our Model 3540 Deflection Gage is used for measuring deformation in three and four point bend tests, strain in compression tests and a variety of displacements in situations where measurement is difficult or impossible with a standard extensometer. Deflection is measured with a single arm, using a spherical contact tip, like a dial indicator. The magnetic base can bee mounted to the desired reference surface - whether flat or round. The tip is then positioned to measure deformation during the test. The spring-loaded arm can break free in the event of excessive travel, protecting the unit from damage. The electronic signal conditioning requirements are the same for any full bridge strain-gaged transducer. |
| Model | Description | Travel | Linearity | |
|
3540-0250 | Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-0500 | Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-1000 | Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-004M | Metric Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-006M | Metric Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-012M | Metric Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-025M | Metric Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
|
3540-0150 | Deflection Gage (Deflectometer) with Magnetic Extendable Base, Calibration, and connector to your requirements. |
|
|
|
| 1 |
|